Filter
Anthracite, Anthracite Filter Media
We are one of the known Exporters, Manufacturers and Suppliers of
Anthracite Filter Media, Filter Anthracite. in New Delhi, India.
Anthracite produces consistent improvements in turbidity removal
because, in part, to more efficient solids loading. Low uniformity
coefficient media also produces smaller changes in effluent
turbidity during periods of peak influent turbidity.
Anthracite filter media which is used in open and closed filter for
filtration of brine apart from corrosive liquid is. Its irregular
shape is suitable for single and multilayer filtration. Low density
in wet condition enable low backwash rate.
Clarified brine is pumped into anthracite filter for removal
of suspended solids. Normally suspended solid load after clarifier
is in the range of 10 – 15 ppm. It has been our experience that if
clarifier is designed for maximum solids 20 ppm at the outlet then
low leakage or suspended solids and longer service run of anthracite
filter can be ensured.
Our outputs of the Anthracite Filter come utilized in a variety of
filter media in various open and closed filters for water and
wastewater treatments from across the spectrum. Our outputs come
hydraulically categorized and float above other heavier media such
as sand, manganese, greensand etc. Our output has to its name a
wonderful regular shape that comes suitable for various single and
multi-layer filtration operations and options.
Chemical Properties
Ash Content 20.0% max
Carbon Content 80.0% min
Physical Properties
Appearance Black granules
Specific Gravity (avg) 1.4 – 1.5
Packing Density (avg) kg/m3 1000-1100
|